CORNING SCF-1728 Podręcznik - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt laboratoryjny CORNING SCF-1728. CORNING SCF-1728 14 stron. Heat shrink open ribbon system (hs-ors) canister splice closure

Drukuj stronę

For large strength members (greater than 3mm in diameter)

Step 1:

Use the supplied strain-relief kit, instead of the restraint caps (Figure 32).

Step 2:

Slide the metal tube over the end of the central

member.

Step 3:

Align the threads in the side of the tube with the

hole in the strain-relief bracket.

Step 4: Install the supplied screw through the bracket and

the threaded hole in the tube and tighten .

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA

800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm

Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without

prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are

TPA-5996

Standard Recommended Procedure 206-455-AEN | Issue 1 | November 2018 | Page 14 of 14

Figure 32