ALIBI ALI-NS4012R Instrukcja szybkiej instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Kamera bezpieczeństwa ALIBI ALI-NS4012R. ALIBI ALI-NS4012R 5 stron. 2 mp ip 100 ft ir bullet camera
Również dla ALIBI ALI-NS4012R: Instrukcja szybkiej instalacji (4 strony)
Drukuj stronę
Step 6.
Login to the camera
NOTE: If the camera LAN extension cable is attached to a Network Video Recorder (NVR), skip this step.
Microsoft® IE is used to access your camera remotely. IE must run as an Administrator to use all features
available through a remote login to the camera.
Setting MS Internet Explorer to run as an Administrator
Window 7: To run IE as an Administrator:
1.
Find or create an IE icon on your computer desktop.
2.
Hold down the shift key, and then right-click on the IE icon.
MS Internet
Explorer icon
3.
Click Run as administrator in the pop-up menu.
Window 10: To run IE as an Administrator:
1.
Find MS IE in the start menu. Usually this is found in the Windows Accessories group.
2.
Pin the entry to Start.
3.
Right click on the Internet Explorer tile, and then select More | Run as administrator.
To login to the camera from a computer on the same LAN:
1.
Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of
the camera in the URL field. In the example below, the IP address of the camera is 192.168.0.7.
3
www.observint.com
2.
3.
Run as administrator
Run as
administrator
Step 7.
1.
In the login window, enter admin for the User Name and the password you created in the
Password field, the click Login.
If this is the first time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
a.
Click on the message to install the plugin.
b.
In the message bar at the bottom of the screen, click Run. Follow the on-screen
instructions to install WebComponents. When the following screen opens, click Finish.
The Live View screen with the camera video image should appear.
Screen select tabs
Live View image
Adjust the camera for your surveillance target
While observing live video from your camera in the Live View tab (see above), loosen the lock
nut, and then point the camera at the center of your surveillance target. Tighten the lock nut to
hold the camera in place.
© 2019 Observint Technologies. All rights reserved.
Logout button
Capture, Record, Zoom icons