GarageAce S6 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Otwieracz drzwi garażowych GarageAce S6. GarageAce S6 20 stron. Sectional/tilt garage door opener

Drukuj stronę

1. Coding Remotes & Wall Switch

Features

Locking door during power failure: If power failure occurs while the door is operating, the

door can be released by pulling the clutch down, allowing manual opening or closing and

locking. To reset the door when the power comes back on, press the button on the remote,

the door will open while the clutch moves to closing position. After this, normal operation is

resumed.

Rolling Code: The integrated circuitry generates unique rolling codes. This high security

feature enables pairing with up to 20 remotes.

Position Memory: The position limits of the door are retained in the memory of the

microcomputer chip. You never need to adjust it, even after power failure.

Soft Start & Stop: This lessens impact forces on the door, prolonging service life and

decreasing operating noise.

Resistance Adjustment: the opener continually checks and, where necessary, adjusts its

force sensitivity. Manual adjustment is unnecessary.

Photo-Beam Protector: This can be connected with the opener to give additional

protection. There are three working modes available for the photo-beam:

OFF

ON permantly

ON only when door closing

Auto Closing: If you forget to close the door, it will close automatically after a set time. The

time can be set from 1 to 9 minutes. This function is optional.

Fault Checking: The opener will check for faults and show the code on its LED display. This

makes adjustment and maintenance easy.

Easy Operation: Settings are shown on the LED display, making operation easy.

S6 Instruction Manual