Makita 4351FCT Informacje techniczne - Strona 8

Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita 4351FCT. Makita 4351FCT 15 stron. Jig saw
Również dla Makita 4351FCT: Specyfikacje (2 strony), Podział części (3 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (9 strony)

epair

[9] Disassembling parts in Gear housing

1. After separating Safety wire from Gear housing cover, remove four 4x16 Tapping screws CT .

Gear housing cover is separated from Gear housing as illustrated in Fig. 25.

Fig. 25

Tapping screws

CT 4x16

2. While Locking Crank complete with 1R235, remove two M4x12 Hex socket head bolts. (Fig. 26)

Fig. 26

Balance plate

Caution: The above M4x12 Hex socket head bolts are threadlocked

3. Disassemble Retaining S-8. Then, the inner parts are disassembled from Gear housing as illustrated in Fig.27.

Fig. 27

Retaining S-8

Gear housing cover

No.1R235

Round bar for arbor

Retaining ring S-8

with adhesive.

Needle bearing 407 (It is easy to drop out of Gear complete.

Therefore, do not miss it.)

Balance plate

Gear complete

Push plate

Seal plate

Gear housing

2 pcs. of hex socket

head bolts M4x12

Crank complete

Flat washer 8

Gear housing

P 8 / 15