Makita 4351T Informacje techniczne - Strona 2

Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita 4351T. Makita 4351T 15 stron. Jig saw
Również dla Makita 4351T: Specyfikacje (2 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (9 strony)

Drukuj stronę

epair

CAUTION: Unplug the tool and remove the jig saw blade for the safety before maintenance !

Code No.

Bearing setting pipe 16-8.2

1R026

1R235

Round bar for arbor 6-100

Retaining ring S and R pliers

1R291

1R311

Retaining ring pliers with long bent nails

1R014

1/4" Hex. shank bit M4 for Hex. socket head bolt

1R220

Ratchet head 9.5 (for 1R219)

1R222

Socket adapter (for 1R219)

1R228

1/4" Hex.shank bit for M4

Torque wrench shaft 2-6N.m

1R254

134873-0

Bit adapter ass'y

1R269

Bearing extractor

< 1 > Lubrication

Apply Makita grease FA. No.2 to the portions marked with black triangle, and machine oil No.120

to the portions marked with gray triangle to protect parts and product from unusual abrasion.

Pins of Gear housing cover

for supporting Balance plate

Needle bearing 407

Hex. socket head bolt

M4x12 (two pcs in total): See Note below.

Item (Code No.)

Makita grease FA. No.2

(042025-8A: 2.5kg)

Machine oil No.120

Note: When removing two M4x12 Hex. socket head bolts illustrated above, put the appropriate amount of Loctite

241/242 or ThreeBond 1321/1342 on the thread of the screws and then fasten them.

Description

Linear guide

Slider

Crank complete

Rod

Push pin

Blade holder

Description

Gear housing

The positions painted with gray

Balance plate

The portion where contacts Gear complete.

The pins which supports Balance plate.

Gear housing cover

The portion where contacts Retainer.

Push plate

The portion where contacts Push plate.

Retainer

Linear guides

The portion where contacts Slider.

Slider

The portion where contacts Needle bearing 407.

Push pin

Its whole part

Gear housing cover

The hole where Rod reciprocates.

Rod

The portion where contacts Dust seal.

Inserting Self lock 6

Securing Crank

Removing/ Installing Retaining ring S-8 in Crank housing

Removing/ Installing Retaining ring R-18

Fastening M4x12 Hex. socket head bolts

Replacing Ball bearings

Balance plate

Gear complete

Push plate

Retainer

Portion to lubricate

P 2 / 15

Use for

Gear housing