CORNING 80-6113-8081-9 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki CORNING 80-6113-8081-9. CORNING 80-6113-8081-9 8 stron. Pole, wall, and pedestal mounting kits for fiber dome terminal and closure series fdc/fdtc/fdst 08m & 08s
Drukuj stronę3.2 Loosen (do not remove) nuts on both clamp brackets.
3.3 Slide tabs on terminal base feet into slots on the mounting bracket clamps as shown. Ensure the closure base is
seated in slots in both clamp brackets as shown. Tighten the nut on both clamp brackets to 35 ± 5 in.-lbs.
3.4 Secure cable ends in pedestal base.
4.0 CHANNEL MH1010 PEDESTAL INSTALLATION USING FIBER DOME TERMINAL
AND CLOSURE MOUNTING KIT FDC-08M-PED-BRKT
4.1 Remove pedestal cover. Remove pedestal components that may interfere with installation. Determine the location
of the terminal and install the carriage bolt with the head on the outside of the mounting frame. The bolt can be secured
using the plastic screw retainer washer. Position the mounting bracket as shown and use the supplied nut to secure the
mounting bracket. Torque to 35 ± 5 in.-lbs.
Standard Recommended Procedure 78-0013-4546-7 | Issue 2 | October 2019 | Page 3 of 8