HIKVISION DS-7216HUI-K2/P Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION DS-7216HUI-K2/P. HIKVISION DS-7216HUI-K2/P 17 stron.
Drukuj stronę
R E A R P A N E L S ( c o n t i n u e d )
No.
Item
1
VIDEO IN
2
ALARM IN
3
AUDIO OUT
4
VGA
5
HDMI
6
USB Interface
7
LAN
8
RS-485
9
Power Input
10
Power Switch
11
Ground
12
Video Out
13
Alarm I/O
14
Alarm I/O Legend
1
C O N N E C T D E V I C E S
1.
Connect power supply to the DVR.
2.
Connect DVR to LAN using Cat 5e cable.
3.
Connect video monitor(s) to DVR using HDMI and/or VGA cables, as appropriate.
4.
Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5.
Connect to audio I/O using RCA connectors.
2
S T A R T T H E D V R
1.
Plug power supply plug into 110 to 240 VAC outlet (surge suppressor is recommended).
2.
Turn power switch on. Power indicator LED will turn on to indicate unit is starting.
3.
After startup, power indicator LED will remain on.
3
L O C A L A C T I V A T I O N
System access requires a secure, user-assigned password.
Description
BNC connector for video input.
/P Models Only: Power-over-Coax (PoC) function provides power to PoC enabled cameras. Up to
984 ft (300 m) range when using AF RG6.
Connectors for alarm inputs
RCA connectors for audio output
DB-15 connector for VGA output to display local video output and men
HDMI video output connector
Connect to USB mouse or USB flash memory devices
Connector for LAN (Local Area Network)
Connector for RS-485 devices: T+ and T- pins connect to R+ and R- pins of PTZ receiver
respectively
D+, D- pin connects to Ta, Tb pin of controller (for cascading devices, the first DVR's D+, D- pin
should be connected with the D+, D- pin of the next DVR)
Power supply connection
Switch for turning device on/off
Connect before powering up
BNC connector for CVBS signal out
Alarm input and output connectors
Alarm input and output labels