Makita 5630DWA Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 5630DWA. Makita 5630DWA 20 stron. Equipped with electric brake
Również dla Makita 5630DWA: Lista części (2 strony)

Drukuj stronę

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

Replacing carbon brushes

Remove and check the carbon brushes reg-

ularly. Replace when they wear down to

the limit mark. Keep the carbon brushes

clean and free to slip in the holders. Both

carbon brushes should be replaced at the

same time. Use only identical carbon

brushes.

Use a screwdriver to remove the brush

holder caps. Take out the worn carbon

brushes, insert the new ones and secure

the brush holder caps.

Limit mark

Fig. 21

Fig. 22

To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should

be performed by Makita Authorized or Factory Service Centers, always using Makita

replacement parts.

Trickle charge (Maintenance charge)

If you leave the battery cartridge in the charger to prevent spontaneous discharging after

full charge, the charger will switch into its "trickle charge (maintenance charge)" mode

and keep the battery cartridge fresh and fully charged.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely discharged.

Always stop tool operation and charge the battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F

104°F).

Let a hot battery cartridge cool down before charging it.