Makita 5680DWB Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 5680DWB. Makita 5680DWB 20 stron. Equipped with electric brake

Do not use dull or damaged blade. Unsharpened or improperly set blades

produce narrow kerf causing excessive friction, blade binding and KICKBACK.

Blade depth and bevel adjusting locking levers must be tight and secure before

making cut. If blade adjustment shifts while cutting, it may cause binding and

KICKBACK.

Use extra caution when making a "Pocket Cut" into existing walls or other

blind areas. The protruding blade may cut objects that can cause KICKBACK.

NEVER place your hand or fingers

behind the saw. If kickback occurs,

the saw could easily jump backwards

over your hand, possibly causing

severe injury.

Fig.

12.

Adjustments. Before cutting be sure depth and bevel adjustments are tight.

13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before

cutting.

14. When operating the saw, keep the

cord away from the cutting area and

position

so that

will not be caught

on the workpiece during the cutting

operation.

Operate w i t h proper hand support,

proper workpiece support,

and

supply cord routing away from the

work area.

A typical illustration of proper hand

support, workpiece support, and

supply cord routing.

WARN IN

Fig.

It is important t o support the workpiece properly and t o hold the saw firmly

t o prevent loss of control which could cause personal injury. Fig. 4 illustrates

typical hand support of the saw.