Makita 6823 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 6823. Makita 6823 8 stron. Drywall screwdriver
Również dla Makita 6823: Instrukcja obsługi (17 strony), Podział części (3 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (7 strony), Instrukcja obsługi (10 strony), Informacje techniczne (10 strony), Instrukcja obsługi (12 strony)

Drukuj stronę
Makita 6823 Instrukcja obsługi
Hook
A
002644
002645
The hook is convenient for temporarily hanging the tool.
When using the hook, pull it out in "A" direction and then
push it in "B" direction to secure in place.
When not using the hook, return it back to its initial
position by following the above procedures in reverse.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing or removing the bit
To remove the bit, first pull the locator out of the locking
sleeve. Then grasp the bit with a pair of pliers and pull
the bit out of the magnetic bit holder. Sometimes, it helps
to wiggle the bit with the pliers as you pull.
1
002653
To install the bit, push it firmly into the magnetic bit
holder. Then install the locator by pushing it firmly back
onto the locking sleeve.
1. Hook
1
B
1. Locator
2. Locking sleeve
2
2
3
002661
Installing removable cord adapter
For Model 6825R
004178
Insert the Removable Cord Adapter as far as it goes so
that the marking
Adapter on the side of connecting to power supply cord
is aligned to the marking
Removable Cord Adapter on the side of connecting to
the tool.
Turn the Removable Cord Adapter clockwise until it is
locked with a lock button.
004179
And at this time the marking
Removable Cord Adapter on the side of power supply
cord is aligned to the marking
Removable Cord Adapter on the side of connecting to
the tool.
5
1. Locator
1
2. Bit
3. Magnetic bit
holder
on an end of the Removable Cord
on the other end of the
1. Lock button
1
on an end of the
on the other end of the