Makita 6906 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 6906. Makita 6906 13 stron. Makita 6906 impact wrench: specifications
Również dla Makita 6906: Podział części (3 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (7 strony), Instrukcja obsługi (8 strony)

Drukuj stronę
Makita 6906 Instrukcja obsługi
USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num-
ber, the heavier the cord.
Ampere Rating
More Than
0
6
10
12

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to impact wrench safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will
make exposed metal parts of tool "live" and
shock the operator.
2. Wear ear protectors.
3. Check the socket carefully for wear,
cracks or damage before installation.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
4
Table 1: Minimum gage for cord
Not More Than
6
10
12
16
Volts
Total length of cord in feet
120 V
25 ft.
18
18
16
14
4. Hold the tool firmly.
5. Always be sure you have a firm footing.
Be sure no one is below when using the
tool in high locations.
6. The proper fastening torque may differ
depending upon the kind or size of the
bolt. Check the torque with a torque
wrench.
50 ft.
100 ft.
AWG
16
16
16
14
16
14
12
Not Recommended
150 ft.
14
12
12
USB003-2