Makita 6907D Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 6907D. Makita 6907D 14 stron. Cordless impact wrench equipped with electric brake 9.5 mm (3/8”)
Również dla Makita 6907D: Instrukcja obsługi (2 strony), Instrukcja obsługi (17 strony)

Drukuj stronę

Installing or removing the battery cartridge

Always switch off the tool before insertion or removal of the battery cartridge.

To remove the battery cartridge, pull out the set plate on the tool and grasp both sides

of the cartridge while withdrawing it from the tool.

DC9700

DC1201

Battery cartridge

9100

Approx. 60 min.

Approx.

min.

To insert the battery cartridge, align the

tongue on the battery cartridge with the

groove in the housing and slip it into place.

Snap the set plate back into place. Be sure

t o close the set plate fully before using the

tool.

Do not use force when inserting the bat-

tery cartridge. If the cartridge does not slide

in easily, it is not being inserted correctly.

DC9112

Approx. 60 min.

Charging

Plug the fast charger into your power source.

Insert the battery cartridge so that the plus

and minus terminals on the battery cartridge

are on the same sides as their respective

markings on the fast charger. Insert the

cartridge fully into the port

that it rests

on the charger port floor. Press the start

button (red). The charging light will come on

and charging will begin. If the charging light

Charging light

Start button

Reset button