Avantgarde SOLO Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Avantgarde SOLO. Avantgarde SOLO 19 stron.
Drukuj stronę
SOLO
SAFETY INFORMATION
CAUTION
It is intended to alert the user of the presence
of uninsulated „dangerous voltage" within the
products enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock
to persons.
To prevent fire, shock or damage, do not expose
the components to rain or moisture.
To avoid electrical shock, do not open the
cabinet of the components. Refer servicing to
qualified personnel only.
Excessive sound pressure levels might cause
serious damage to your health. Do not turn the
speaker system too loud.
PRECAUTIONS
ON SAFETY
Should any solid object or liquid fall into the
cabinet of the components, unplug the unit and
have it checked by qualified personnel before
operating it any further.
Unplug the components system from the wall
outlet if they are not to be used for an extended
period of time. To disconnect the power cord, pull
it out by the plug. Do not pull the cord itself. Never
touch the plugs with wet hands.
Only let qualified personnel repair or reassemble
the components of the system.
Version 1.4 – May 25, 2007
ON INSTALLATION
The spherical horns are not constructed to
support the weight of the speakers. Do not move
or carry the speakers by holding to its horns. To
avoid damaging the finish, never use alcohol, paint
thinner or chemicals to clean the components.
Good air circulation is essential to prevent
internal heat build-up in the components. Place
units in a location with sufficient air circulation.
Do not install the speakers in a location near
heat sources such as radiators, or in a place subject
to direct sunlight, excessive dust, or mechanical
vibration.
Place the components of the system on a flat
solid surface. Do not install the units in inclined
position.
Connect everything securely. Always insert the
plugs fully into the jacks. A loose connection may
cause hum pickup and can damage the system.
To prevent malfunction and short circuits, use only
high quality cables with self tightening banana
speaker and RCA or XLR plugs.
Read this operators manual thoroughly before
operating the speaker system.
OPERATING VOLTAGE
Before connecting the speaker system to the power
source, check that the operating voltage of the unit
is the same as the local power line voltage.
Europe
230 V AC, 50 Hz
United Kingdom
240 V AC, 50 Hz
USA, Canada
120 V AC, 60 Hz
Other countries
100, 120, 220 or
240 V AC, 50/60 Hz
www.avantgarde-acoustic.de
page 3