Makita 8406 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 8406. Makita 8406 8 stron. Diamond core hammer drill
Również dla Makita 8406: Instrukcja obsługi (7 strony), Instrukcja obsługi (9 strony)

Drukuj stronę
Makita 8406 Instrukcja obsługi
ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for drilling in brick and concrete with
diamond core bit. It is also suitable for impact drilling in
brick, concrete and stone as well as for drilling without
impact in wood, metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment
and
Diamond core bit
Tungsten-carbide tipped bit
END201-5
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
its
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE040-1
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
ENF002-1
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
2
8406
152 mm
20 mm
13 mm
30 mm
0 - 1,500
0 - 22,500
400 mm
3.7 kg
/II
) : 94 dB(A)
pA
) : 105 dB(A)
WA
Wear ear protection
2
) : 9.0 m/s
h,ID
2
2
) : 9.5 m/s
h,DD
2
2
) : 2.5 m/s
h,D
2
ENG905-1
ENG900-1
or less
ENG901-1