Makita 8406 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 8406. Makita 8406 9 stron. Diamond core hammer drill
Również dla Makita 8406: Instrukcja obsługi (7 strony), Instrukcja obsługi (8 strony)
Drukuj stronę
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
► 1. Switch trigger
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
Selecting the action mode
► 1. Change lever
This tool has an action mode changing lever.
For rotation with hammering, turn the lever to the posi-
tion of
symbol.
For rotation only, turn the lever to the position
of
symbol.
Torque limiter
CAUTION:
•
Do not continue to operate the tool for more
than two seconds while the clutch is slipping.
•
Do not let the torque limiter actuate too
frequently.
This tool is equipped with a clutch-type torque lim-
iter. The clutch will slip when a certain torque level
is reached, causing the motor to disengage from the
output shaft. When this happens, the chuck will stop
turning.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
1
unplugged before carrying out any work on the
tool.
Installing side grip (auxiliary handle)
Always use the side grip to ensure operating safety.
Screw the side grip on the tool securely. The side grip
can be installed on either side of the tool, whichever is
convenient.
Installing or removing diamond core
bit or drill bit
1
► 1. Chuck key
5 ENGLISH
1