Makita AN450H Informacje techniczne - Strona 12
Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita AN450H. Makita AN450H 16 stron. Pneumatic roofing coil nailer
Drukuj stronę
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-8 Trigger base section
DISASSEMBLING
(1) Disassemble Trigger base section as per the left and center illustrations in Fig. 17.
(2) The removed Trigger base section are disassembled as illustrated in Fig. 22.
Fig. 22
Trigger base
Pin 3 as an axis for
Stopper plate and Lever
Pin 3 as an axis for
Trigger
Remove 2 pcs. of Pin 3.
Trigger base section are dissembled as
illustrated right.
ASSEMBLING
(1) Assemble Trigger and Lever for sequential firing to Trigger base as illustrated in Fig.23.
Fig. 23
Lever for
sequential firing
Torsion
spring 4
Mount Torsion spring 4 to Lever (for Sequential firing) and assemble them to Trigger base together
with Trigger.
Pass Pin 3 through Trigger, Torsion spring 4 and Lever (for Sequential firing) as illustrated above.
Torsion
spring 5
Spring pin 2-12
Stopper plate
Lever for
Single firing
Torsion spring 4
Torsion spring 6
Trigger
Pin 3 as an axis for
Trigger
Lever for Sequential firing
Trip Lever
Torsion spring 4
Spring pin 2-12
Pin 3 as an axis for
Stopper plate and Lever
Pin 3 as an axis for Trigger
P 12/ 16