Makita AN450H Informacje techniczne - Strona 8
Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita AN450H. Makita AN450H 16 stron. Pneumatic roofing coil nailer
Drukuj stronę
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-5 Magazine cap complete
DISASSEMBLING
Refer to Fig. 14.
Fig. 14
Remove Magazine cap by unscrewing
M5x12 Hex socket head bolt (2pcs.).
Lock lever, Lock pin, etc. still remain
on Magazine cap complete in this step.
M5x12 Hex
Socket head
bolt (2pcs.)
Magazine cap complete
Lock lever
ASSEMBLING
Take the disassembling step in reverse.
[4]-6 Check claw
DISASSEMBLING
Refer to Fig. 15.
Fig. 15
slotted screwdriver
Pin 4
Push Pin 4 toward Housing set with slotted screwdriver,
and pull off it with pliers.
Note: Do not lose Urethane ring 3 for holding Pin 4 in Door.
M5x12 Hex Socket head bolt
(shown below) is screwed into
the hole of Lock pin.
Therefore, clamp Lock pin with
vise then remove M5x12 Hex
socket head bolt.
Magazine cap complete
M5x12 Hex
socket head
bolt
Lock lever
Lock pin
Door
pliers
Urethane ring 3
Pin 4
Door
Remove the other components as
illustrated below.
Magazine cap complete
Lock pin
Lock lever
Check claw that is held to the inside of Door
with Pin 4 is removed.
P 8/ 16
Compression
spring 6
Lock pin
Flat washer 6
Door
Check claw with
compression spring 4