James KAVEZ 70 INOX Podręcznik instalacji, użytkowania i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik instalacji, użytkowania i konserwacji dla Okap wentylacyjny James KAVEZ 70 INOX. James KAVEZ 70 INOX 14 stron.

Drukuj stronę
DECORATIVE EXTRACTOR HOOOS
Dear client,
We are sure that the purchase of our extractor hood will fully sat¡sfy all of your needs.
Please read this instruction manual carefully
¡n
order to obta¡n the best results from the use of the hood
Before ¡nstalling and using
the
hood, be sure that the voltage (V) and the frequency (Hz) ind¡cated on the feature plate match
the voltage.and frequency at the inslallat¡on site.
The feature plate and technical dala are shown on the inside of the product.
For better
pelormance
¡n
extracting fumes we advise that tub¡ng instal¡ed should be of a diameter not less
than
120 mm. We
also advise using r¡gid PVC tubing.
ELECTRICAL CONNECTION
Connect the cord to a socket or double pole sw¡tch, which
musl
have a minimum contact opening distance of 3
mm.
The manufacturer shall not be liable for failure to obserue all safely regulations
¡n
force for the correct and normal operat¡on
of
electrical parts.
CONTROL PANELS:
All of the figures of the control panels can be found on the penult¡mate page.
Sl¡der
control
panel
This panel
is
located on the lower part of the hood and includes:
-
4 position motor control switch (OFF,
'1"t,
2M
and
3'd
speed positions) (Ref. A).
-
Motor control light (Ref.
B).
-
Light sw¡tch (Ref.
C).
Electronic sw¡tch
control
Danel
This panel
¡s
located
on
the front part of the hood and includes:
-
3 pos¡tion motor control sw¡tch (1st, 2nd, and 3rd speed) (Ref.
D).
-
Lighting control lamp. Fig. 6. (Ref.
E).
-
Motor control lights. (Ref.
G).
-
Light switch (Ref.
F).
flullg:
To operate the canopy timer, having selecled the speed, press the butlon for two seconds
unt¡l
the LED light btinks.
The timer will then work
for
I
5
m¡nutes.
At the end of
th¡s
time, the motor will stop and the light will go out. lf it
¡s
still on, and you
w¡sh
to cancel the t¡ming, press the
timer button once and the motor
w¡l¡ stop.
Four-speed
control
panel
with
d¡qital ind¡cator
This panel
is
situated on the front of the extractor and ¡ncludes:
-
Button for the light (ref.
K).
-
On/off button of the motor (ref.
L).
-
Button for reducing the motor speed (ref.
M).
-
Motor speed ind¡cator (ref.
N).
-
Button for increasing the motor speed (ref.
O),
-
Button for d¡rectly activating the TURBO speed of the motor (ref. p).
-
Button for setting the timer
of
the motor (ref.
Q).
The extractor will operate for 5 m¡nutes at the current speed and 5 m¡nutes at each of the lower speeds until coming to
a
complete stop.
Five-button
conirol
panel
Th¡s panel
¡s
situated
on
the front of the extractor and includes:
-
3 control sw¡tches for the motor (speed positions
'1
,
2 and 3)
(ref
W)
-
Off button of the motor (ref V)
-
On/off light of the motor (ref T)
-
Light sw¡tch (ref.
U)
Mechan¡cal push Four-button
control
panel:
Th¡s panel is located
on
the front part
ofthe
hood and includes:
-
3
pos¡t¡on
motor control switch (1st, 2nd, and 3rd speed) (Ref.
H).
-
lvlotor
control light (Ref.
l).
-
Light switch (Ref. J).
NOTE: To operate at the 2nd and 3rd speeds, the first speed must be act¡vated.
This panel
is
s¡tuated on the front of the extractor and includes:
-
4
butlons for controlling the operat¡on of the motor (pos¡t¡on
1,
2,
3
and turbo) (Ref
R)
-
Button for the
l¡ght.