Makita AN901 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita AN901. Makita AN901 20 stron. Construction coil nailer
Również dla Makita AN901: Podział części (4 strony), Instrukcja obsługi (12 strony)

Drukuj stronę

.Never use the tool with other than compressed

air. If bottled gas (carbon dioxide, oxgen, nitro-

gen, hydrogen, air, etc.) or combustible gas

(hydrogen, propane, acetylene, etc.) is used as

a power source for this tool, the tool will explode

and cause serious injury.

*Always check the tool for its overall condition

and loose screws before operation. Tighten as

required.

Make sure all safety systems are in working order

before operation. The tool must not operate if

only the trigger is pulled or if only the contact

element is pressed against the wood. It must work

only when both actions are performed. Test for

possible faulty operation with nails unloaded.

COMPRESSED

AIR