E-Service Payter Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czytnik kart E-Service Payter. E-Service Payter 9 stron. Wireless card reader
Drukuj stronę
Payter Installation Guide
14. Check that the board is correct
The board should now be connected to the back of the coin mechanism and the Payter loom
as shown in Figure 12.
Figure 12
15. Place the aerial inside the machine
Using the magnetic base of the aerial, attach the aerial closer to the top of the machine. Run
the aerial cable to the Payter unit and screw into back of Payter device.
16. Connect the mechanical meter to the board
Connect the mechanical meter to the board as shown on the connections page on the last
page of the manual. Locate the Payter mechanical meter in a suitable position.
17. Tidy the inner door cables
Tidy all the cables on the inner door using cable clips provided, as shown in figure 13.
Figure 13
7