HIKVISION DS-7608NI-I2/8P Skrócona instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION DS-7608NI-I2/8P. HIKVISION DS-7608NI-I2/8P 17 stron.

Drukuj stronę
HIKVISION DS-7608NI-I2/8P Skrócona instrukcja obsługi
1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )
 Record Quality
•
IP Cameras

Analog Cameras

Main Stream
1.
Go to RECORDING CONFIGURATION > RECORD QUALITY > MAIN STREAM and set
the following items:
- Stream Type enables/disables audio streaming from the cameras (if the camera does
not have audio capabilities, Stream Type will have only Video option).
- Resolution sets recording resolution.
- Bitrate Type (Variable and Constant) saves HDD space when set to Variable.






- Video Quality adjusts picture clarity (high setting = four green squares is default).
Consider highest if hard drive space allows. Medium setting is a balance between good
picture and saving HDD space.
- Frame Rate sets recording frame rate (8 fps on continuous and 15 on motion by
default). Higher frame rates require more storage, but allows better slow motion
playback.
- Max Bitrate Mode chooses between pre-set bitrate values and customized values
(General setting is default).


 MAIN STREAM
Select tab
 CAMERA
Select IP camera
 EVENT
For event recording only (motion
or alarm)
CONTINUOUS
For live view image and
continuous recording
VIDEO QUALITY
Select
number of green squares
to set quality (in example,
sensitivity is set to 3)
 MAIN STREAM
Select tab
 CAMERA
Select analog camera
 EVENT
For event recording only (motion
or alarm)
CONTINUOUS
For live view image and
continuous recording
VIDEO QUALITY
Select
number of green squares
to set quality (in example,
sensitivity is set to 3)