Avanti BCA3191B Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Avanti BCA3191B. Avanti BCA3191B 16 stron. Avanti products refrigerator

 Electrical Connection

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized Avanti Products service center.

This refrigerator should be properly grounded for your safety. The power cord of this refrigerator is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

This refrigerator requires a standard 115/120a/c~volt/60Hz electrical outlet with three-prong ground.

The cord should be secured behind the refrigerator and not left exposed or dangling to prevent

accidental injury.

Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and pull straight

out from the receptacle.

Do not use an extension cord with this appliance. If the power cord is too short, have a qualified

electrician or service technician install an outlet near the appliance



Setting the Temperature Control

• To control the internal temperature, adjust the control dial according

to the ambient temperature or purpose of use.

• The first time you turn the unit on, set the temperature control to "6."

• The range of the temperature control is from position "OFF to 6."

After 24 to 48 hours, adjust the temperature control to the setting

that best suites your needs. The setting of "4" should be correct for

home or office refrigerator use.

NOTE:



If the unit is unplugged, has lost power, or turned off; you must wait 3 to 5 minutes before

restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start.



Warning

OPERATING YOUR REFRIGERATOR

