Makita BFL400F Informacje techniczne - Strona 13

Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita BFL400F. Makita BFL400F 13 stron. Cordless angle screwdriver
Również dla Makita BFL400F: Instrukcja obsługi (17 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (10 strony)

Drukuj stronę

iring diagram

[3] Wiring the Lead Wires from LED Circuit on Lead Holder

Fig. 31

Make the lead wires so that

they cannot be pulled to

disconnect LED circuit from

Controller when Switch

cover is installed.

Hook the lead wires

on the five tabs of

Lead holder.

Remark:

Do not place the lead

wires over the tabs.

Route the lead wires

under the pin.

Route the lead wires

beside rib (K) and

Switch unit (for Clutch).

Switch unit (for Clutch)

tab

rib (K)

LED circuit

tab

Route the lead wires between

rib (H) and rib (I), and then

rib (I) and rib (J).

rib (H)

rib (I)

rib (J)

Put Connector and the sag

of the lead wires in the space

between Housing and rib (L).

rib (L)

Connector

P 13/ 13