Makita BJN161 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita BJN161. Makita BJN161 12 stron. Cordless nibbler
Również dla Makita BJN161: Instrukcja obsługi (13 strony), Instrukcja obsługi (11 strony), Informacje techniczne (8 strony), Instrukcja obsługi (13 strony)

Drukuj stronę

013274

To install the punch and die, insert the punch into the

punch holder so that the notch in the punch faces

toward the screw. Tighten the screw to secure the

punch. Install the die on the die holder. Tighten the bolts

to secure the die.

004781

Then install the die holder on the tool so that the punch

is inserted through the hole in the die holder. Tighten the

lock nut to secure the die holder. After replacing the

punch and die, lubricate them with machine oil and run

the tool for a while.

004782

OPERATION

Pre-lubrication

Coat the cutting line with machine oil to increase the

punch and die service life. This is particularly important

when cutting aluminum.

1. Punch

2. Punch holder

3. Screw

4. Hex wrench

5. Loosen

6. Tighten

1. Punch

2. Notch

1. Bolts

2. Die

3. Punch

4. Die holder

Cutting method

013278

Hold the tool so that the cutting head is at a right angle

(90°) to the workpiece being cut. Move the tool gently in

the cutting direction.

Cutouts

013279

Cutouts can be done by first opening a round hole over

21 mm in diameter which the cutting head can be

inserted into.

Cutting the corrugated or trapezoidal sheet

metals

1. From the top view

2. Cutting at an angle to grooves

3. Cutting perpendicular to grooves

4. From the side view

5. Corrugated or trapezoidal sheet metal

013280