Makita BJS161 Informacje techniczne - Strona 5
Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita BJS161. Makita BJS161 9 stron. Cordless straight shears 1.6mm (16ga)
Również dla Makita BJS161: Instrukcja obsługi (8 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Helical gear 34, Ball bearings 627DDW, 6000ZZ, 696ZZ
DISASSEMBLING
(1) Disassemble the shearing mechanism from Crank housing complete as illustrated in Fig. 2.
(2) Disassemble Center blade section as illustrated n Fig. 8.
Fig. 8
Center blade section
(3) Disassemble Ball bearings and remove Crank shaft from Sealing screw and Helical gear 34 as illustrated in Fig. 9.
Fig. 9
Flat washer 7
Ball bearing
Ball bearing
6000ZZ
627DDW
Remove the above illustrated Ball bearings with 1R269, then put
Helical gear 34 on 1R036 to remove Crank shaft.
ASSEMBLING
(1) Assemble Helical gear 34, Sealing screw and Ball bearings to Crank shaft. and fit the assembled Ball bearing 6000ZZ
to Link as illustrated in Fig. 10.
Fig. 10
Crank shaft
Helical
gear 34
Do not face the tall stepped drum side
to Helical gear 34, when mounting
Sealing screw.
Sealing screw
Helical gear 34
Ball bearing
696ZZ
Ball bearing 696ZZ
Sealing screw
Sealing screw
Helical gear 34
Ball bearing 696ZZ
Ball bearing 6000ZZ
Ball bearing 627DDW
Crank Shaft
1R036
Ball bearing
6000ZZ
Flat
washer 7
Ball bearing
627DDW
Sealing screw
Helical gear 34
Crank shaft
Link
Do not forget to mount
Flat washer 7 between Ball
bearing 6000ZZ and
Ball bearing 627DDW.
P 5/ 9