ALIBI ALI-TS2015R Instrukcja szybkiej instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Kamera IP ALIBI ALI-TS2015R. ALIBI ALI-TS2015R 5 stron. 5mp hd-tvi 135 ir varifocal outdoor turret camera

Drukuj stronę

In the PTZ control panel, scroll down the Preset list to Preset95, click the entry to highlight it, and

then click the Call icon. See below. The OSD MAIN MENU screen will open.

The PTZ control panel direction buttons and the Iris + and Iris - keys are used to navigate the OSD

NOTE

menu and set configuration options in the camera.

OSD menu navigation

For the ALIBI Recorder: Navigation and settings in the OSD are made through direction keys and the Iris

+ and Iris - buttons in the HD-TVI DVR PTZ Control panel. See below.

Direction keys

Iris+ Iris–

ALIBI HD-TVI DVR PTZ Control panel

For remote access to the HD-TVI DVR: Navigation and settings in the OSD are made through direction

keys and the Iris + and Iris - buttons in the HD-TVI DVR PTZ control panel. See above.

The function of the directional keys and Iris buttons are defined in the table below.

Keys

Function

Move up in the parameter list

Move down in the parameter list.

www.observint.com

Preset95 Call icon

PTZ control panel

Direction keys

Iris+ Iris–

ALIBI HD-TVI DVR remote access PTZ control

panel

Keys

Function

Move to previous page, field, or move the camera left.

Move to next page, field, or move field right.

Zoom +

Zoom in

Zoom –

Zoom out

Iris+ (OPEN)

Set parameter value, or open sub-menu

Iris– (CLOSE)

Cancel change of parameter.

OSD Definitions: On-screen Display (OSD) menus

After the camera is installed on a compatible recorder, you can open the OSD menu clicking the PTZ Control

icon on the Quick Setting Toolbar or calling a Preset95 function.

To navigate the OSD menu and select options:

Move the cursor up/down to select the menu item.

•

Move the cursor left/right to adjust the value of the selected item.

•

Click the OK key to confirm a selection.

•

OUTPUT MODE

Use the OUTPUT MODE submenu to set the RESOLUTION, FRAME RATE and format (NTSC or PAL).

RESOLUTION: Resolution refers to the number of the pixels contained in an image. You can set the

•

resolution as 5 megapixels, 4 megapixels or 1080p. The higher the value, the finer the image is.

FRAME RATE: Frame rate refers to the number of image output in 1 second. When the resolution is

•

set as 5 megapixels, you are allowed to set the frame rate as 20 fps or 12.5 fps. When the resolution is

set as 4 megapixels, you are allowed to set the frame rate as 25 fps or 30 fps.

NTSC/PAL: NTSC/PAL is only available in 5 MP @ 12.5 fps mode.

•

PAL: (Phase Alternating Lines) is a color encoding system for analog television used in broadcast

—

television systems in most countries.

NTSC: (National Television System Committee) is the analog television system that is used in

—

most of North America, parts of South America, Myanmar, South Korea, etc.