Makita BMR100 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita BMR100. Makita BMR100 20 stron. Makita bmr100: specifications
Również dla Makita BMR100: Podział części (3 strony), Instrukcja obsługi (9 strony)

Drukuj stronę

ENGLISH

IMPORTANT SAFETY

INSTRUCTIONS

WARNING:

When using electric tools, basic safety precautions should

always be followed to reduce the risk of fire, electric

shock, and personal injury, including the following:

1. Read this instruction manual and the charger

instruction manual carefully before use.

2. Clean only with dry cloth.

3. Do not block any ventilation opening. Install in

accordance with the manufacturer's instruction.

4. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

5. Only use attachments/accessories specified by the

manufacturer.

6. Unplug this apparatus during lighting storms or when

unused for long periods of time.

7. A battery operated radio with integral batteries or a

separate battery pack must be recharged only with the

specified charger for the battery. A charger that may

be suitable for one type of battery may create a risk of

fire when used with another battery.

8. Use battery operated radio only with specifically

designated battery packs. Use of any other batteries

may create a risk of fire.

9. When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause sparks, burns,

or a fire.

10. Avoid body contact with grounded surfaces such as

pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is

grounded.

SAVE THESE INSTRUCTIONS.

Features:

• AM/FM-stereo PLL Synthesized

• Large LCD display with illumination

• Manual/Preset/Scan tuning

• Rotary tuning and volume control

• 5 preset stations each band

• Time and 2 alarm timers (radio and HWS buzzer) with

Snooze

• Adjustable sleep (auto shut off) timer

• Stereo speaker for rich sound performance

• Ultra rugged design

• Water resistant to JIS 4

• Powered by both Makita battery pack and supplied

power adaptor

Explanation of general view

Controls:

1. Power and Sleep timer

2. Band/Tuning step selection and Mono button

3. Radio alarm set

4. Buzzer alarm set

5. Preset stations

6. Scan tuning and Time set

7. Volume and Tuning controls

8. DC IN socket

9. Headphone socket

10. Soft bended rod antenna

11. Battery compartment (including main battery pack and

back up batteries)

12. Handle

13. Speaker

14. Battery compartment locker

LCD Display:

A. Radio alarm

B. HWS buzzer alarm

C. Scan tuning

D. Band Indicator

E. Low battery indicator

F. Preset stations

G. Sleep and Snooze status

H. Frequency

Stereo symbol and Volume

J. Clock

K. Time set

L. PM for clock

Battery Installation

Note:

Keeping back up batteries inside the compartment

prevent stored data in preset memories from being lost.

1. Pull out the battery compartment locker to release

battery compartment. There are main battery pack

compartment and back up battery compartment.

(Fig.1 & 2)

2. Remove back up battery compartment cover and

insert 2 fresh UM-3 (AA sizes). Make sure the

batteries are with correct polarity as shown inside the

compartment. Replace the battery cover.