Makita BTM40 Informacje techniczne - Strona 6

Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita BTM40. Makita BTM40 10 stron. Cordless multi tool
Również dla Makita BTM40: Instrukcja obsługi (12 strony)

Drukuj stronę

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Switch Lever

DISASSEMBLING

(1) Remove Crank housing complete from Motor housing.

(Figs. 2, 3)

Then remove Motor section from Motor housing.

(Fig. 4)

(2) Remove electrical parts (Fig. 8), then remove Switch

lever and Switch knob. (Fig. 9)

Fig. 9

Switch knob

Motor housing

2. Switch lever can now be removed from Motor housing by bending Switch lever

to release its rear end from the ribs on Motor housing then pulling it toward

Battery cover side (in the direction of the black arrow).

Fig. 8

Switch lever can be seen by removing from Motor housing

the following five electrical parts:

Controller, Switch, Battery capacity warning lamp,

Dial 28, Terminal.

Switch lever

1. Pressing the locking claws of Switch knob inward with small nose pliers,

push Switch knob off from Motor housing.

locking claw

Switch lever

Switch

Battery capacity

warning lamp

Controller

P 6/10

Dial 28

Terminal