Avanti EWC2410DZ Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Chłodziarka do wina Avanti EWC2410DZ. Avanti EWC2410DZ 20 stron. Avanti products

 Energy Saving Tips
The Wine Chiller should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
One characteristic of superconductor units is the length of time it requires to recover from having
the door opened and shut frequently. It may be necessary to wait longer for the temperature to
return to its former level once the door has been opened for too long. This is normal for this type
of unit.
You can solve many common Wine Chiller problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Wine Chiller does not operate or cool.
Control panel is locked
Wine Chiller is not cold enough.
The light does not work.
Vibrations.
The door will not close properly.
PROBLEMS WITH YOUR WINE CHILLER?

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
Push the
and
3 seconds to unlock the control panel.
Wait for beep sound.
Check the temperature control setting.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The Wine Chiller does not have the correct
clearances.
Abnormal voltage.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The light button is "OFF".
Check to assure that the Wine Chiller is level.
The Wine Chiller is not level.
The door was not properly installed.
The gasket is dirty.
The shelves are out of position.
12
button simultaneously for