Makita DA4031 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita DA4031. Makita DA4031 13 stron. Angle drill
Również dla Makita DA4031: Podział części (3 strony), Instrukcja obsługi (17 strony), Podział części (3 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (10 strony)

Makita DA4031 Instrukcja obsługi
usBoo1-1
SPECIFIC SAFETY RULES
1 . Hold tool by insulated gripping surfaces when performing an operation
where the cutting tools may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool
"live" and shock the operator.
2. Always be sure you have a firm footing. Be sure no one is below when
using the tool in high locations.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool only when hand-held.
6. Do not touch the drill bit or the workpiece immediately after operation;
they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the
symbols
used for tool.
v
....................................
volts
A
....................................
amperes
Hz
....................................
herts
%
....................................
alternating current
n ,
....................................
no load speed
............ Class II Construction
..
Jmin
...................................
revolutions or reciprocation per minute
4