Gardebruk 106894 Podręcznik - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik dla Elektronarzędzie Gardebruk 106894. Gardebruk 106894 20 stron.
Drukuj stronę
16
20. Check damaged parts. Before further use o
tool, it should be carefully checked to determine
that it will operate properly and perform its
parts, binding of moving parts, breakage of parts,
damaged should be properly repaired or replaced
by an authorized service centre unless otherwise
service centre. Do not use the tool if the switch
does not turn it on and off.
21. Warning.
ment other than one recommended in this
injury.
22. Have your tool repaired by a qualified
person. This electric tool complies with the
relevant safety rules. Repairs should only be
carried out by qualified persons using original
spare parts, otherwise this may result in consider-
able danger to the user.
23. Replacement parts and accessories. When
Use of any other parts will void the warranty. Only
use accessories intended for use with this tool.
24. Do not operate tool if under the influence of
alcohol drugs. Read warning labels on prescrip-
are impaired while taking drugs. If there is any
doubt, do not operate the tool.
25. Use proper size and type extension cord. If an
extension cord is required, it must be of the
proper size and type to supply the correct current
extension cord could melt and catch fire, or cause
electrical damage to the tool. This tool requires
use of an extension cord of 0 to 10 amps capabili-
ty(up to 50 feet), with wire size rated at 18 AWG.
Longer extension cords require larger size wire. If
you using the tool outdoors, use an extension
cord rated for outdoor use. (signified by "WA" on
the jacket).
www.DeubaXXL.de
26. Maintenance. For your safety, maintenance
should be performed regularly by a qualified
technician.
27. Never use the Electric Chainsaw Sharpener
around flammable materials.
28. This product contains lead, which is a chemical
known to the State of California to cause cancer
(California Health & Safety Code 25249.5, et seq.)
29.Do not use saw blades.
When working in dusty conditions, make sure that
the air vents are clear.
First disconnect the machine from the mains
-
supply and clean the ventilation openings with a
soft brush if dust removal becomes necessary.
Do not use the machine in a potentially explosive
atmosphere or where sparks could cause fire,
explosion, etc.
The cut-off wheel continues to run after the
machine has been switched off.
WARNING: THE WARNING, CAUTIONS, AND
INSTRUCTIONS DISCUSSED IN THIS INSTRUCTION
MANUAL CAN NOT COVER ALL POSSIBLE CONDI-
TIONS AND SITUATIONS THAT MAY OCCUR. IT
MUST BE UNDERSTOOD BY THE OPERATOR THAT
COMMON SENSE AND CAUTION ARE FACTORS
WHICH CAN NOT BE BUILT INTO THIS PRODUCT,
BUT MUST BE SUPPLIED BY THE UNPACKING.
Grinding Wheel Warnings.
1. Do not use a grinding wheel if it is chipped,
cracked, or worn. You can check if the wheel has
cracks not visible to the human eye by hanging it
up by the central hole and tapping it with a
non-metal object(Ie: screwdriver handle). If it is in
dull sound indicates a crack or break.
2. Only use grinding wheels that fit the
Arbor(7/8"). Do not try to change or modify the
Grinding wheel replacements are available at
Harbor Freight Tools.
www.Deuba24online.de
may cause the wheel to break or disintegrate.
4. Never use the Chainsaw Sharpener without the Grinding Wheel Cover(#11) in place.
5. Always test the Grinding Wheel(#8) by running it for a minute prior to contact with a chain.
6. Keep away from the wheel when it is turning,and make sure no one is standing close, in the line of
7. If the grinding wheel vibrates, turn off the machine immediately and check that it is mounted securely,
and that is not damaged.
8. Never try to stop the finding wheel with your hands, even if you are wearing safety gloves. The wheel
will cut through gloves and your hand, causing serious injury.
9. Never operate tool without the Grinding Wheel Cover in place.
WARNING: THIS MACHINE IS DESIGNED TO SHARPEN CHAINSAW CHAINS. DO NOT ATTEMPT TO SHARP-
EN ANY OTHER TOOLS, AND DO NOT ATTEMPT TO GRIND ANY OTHER OBJECTS.
Warning Symbols
The unit should be operated only by those who have read and understood all the
WARNING – To reduce the
risk of injury, user must read
16
17
www.Deuba24online.de
17
Wear eye protection.
Wear ear protection.
www.DeubaXXL.de