Gardebruk MZ-KS110 Podręcznik - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik dla Elektronarzędzie Gardebruk MZ-KS110. Gardebruk MZ-KS110 20 stron.
Drukuj stronę
14
VII. Explosionszeichnung
Riss oder einen Bruch hin.
www.DeubaXXL.de
www.Deuba24online.de
14
WARNING-To reduce the risk of injury, user must
saw sharpener, so that they may be referred to, if
necessary.
WARNING! When using electric tools basic safety
the risk of fire, electric shock and personal injury
including the following.
injuries.
2. Observe work area environment. Do not use
machines or power tools in damp or wet
well lit. Do not use electrically powered tools in
the presence of flammable gases or liquids.
3. Guard against electric shock. Prevent body
contact with grounded surface such as pipes,
radiators, ranges, and refrigerator enclosures.
4. Keep other persons away. Do not let persons,
especially children, not involved in the work touch
the tool or the extension cord and keep them
away from work area.
5. Store idle equipment. When not in use, tools
Always lock up tools and keep out of reach of
children.
6. Do not force the tool.
and safer at the rate for which it was intended.
7. Use the right. Do not force small tool to do the
job of a heavy duty tool. Do not use for purposes
not intended; for example do not use circular
saws to cut tree limbs or logs.
8. Dress properly. Do not wear loose clothing or
jewelry as they can be caught in moving parts.
and non-skid footwear are recommended when
long hair.
15
www.Deuba24online.de
Always wear ANSI
approved impact safety goggles. Wear a full face
shield if you are producing dust, metal filings or
wood chips.
If the
these are connected and properly used.
11. Do not abuse the cord. Never yank the cord to
disconnect it from the socket. Keep the cord away
from heat, oil and sharp edge.
12. Secure work. Where possible use clamps or a
vice to hold the work. It is safer than using your
hand.
13. Do not overreach.
running machines.
14. Maintain tools with care. Keep tools sharp
accessories. Inspect tool cords periodically and, if
damaged, have them repaired by an authorized
service facility or technician. Inspect extension
cords periodically and replace if damaged. The
handles must be kept clean, dry, and free from oil
15. Disconnect tools. When not in use, before
servicing and when changing accessories such as
power supply.
Form the habit of checking to see that keys and
before turning it on.
Be sure the
before plugging in.
18. Use outdoor extension leads. Ensure the tool
is used outdoors, use only extension cords intend-
ed for outdoor use and so marked.
19. Stay alert. Watch what you are doing, use
common sense. Do not operate any tool when
www.DeubaXXL.de
15
–