Makita DCG180 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita DCG180. Makita DCG180 12 stron. Vezeték nélküli szigetelępisztoly
Również dla Makita DCG180: Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony), (Węgierski) Instrukcja obsługi Instrukcja obsługi (10 strony)

FUNCTIONAL

DESCRIPTION

CAUTION:

ing or checking function on the tool.

Installing or removing battery

cartridge

1. Red indicator 2. Button 3. Battery cartridge

CAUTION:

removing of the battery cartridge.

when installing or removing battery cartridge.

Failure to hold the tool and the battery cartridge

result in damage to the tool and battery car-

while sliding the button on the front of the cartridge.

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator on the

upper side of the button, it is not locked completely.

CAUTION:

red indicator cannot be seen. If not, it may acci-

or someone around you.

cartridge does not slide in easily, it is not being

inserted correctly.

Battery protection system

extend battery life.

tool and/or battery are placed under one of the following

NOTE:

battery cartridge with a star mark.

1. Star marking

Indicating the remaining battery

capacity

Only for battery cartridges with the indicator

1. Indicator lamps 2. Check button

5 ENGLISH

it to draw an abnormally high current.

In this situation, release the switch trigger on

the tool and stop the application that caused

switch trigger again to restart.

If the tool does not start, the battery is over-

heated. In this situation, let the battery cool

before pulling the switch trigger again.

and the tool will not operate. In this situation,

remove and recharge the battery.