JamHub BedRoom Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikser muzyczny JamHub BedRoom. JamHub BedRoom 12 stron.
Również dla JamHub BedRoom: Instrukcja obsługi (12 strony)

Drukuj stronę

Getting Started

phantom

power LED*

SoleMix™

controls

stage

controls

effects

return controls

instrument

inputs (stereo)

input trim

LEDs

SD RAM

card slot**

*GreeRoom and TourBus models only

**TourBus only

Step 1: Turn down all knobs

Left Brain:

Turn all the knobs on the JamHub

to zero (100%

counterclockwise) to protect the device and your

headphones from grounding and connection pops.

Now that everyone's connected, a good starting mix is

your control at 2:00 and every one else at 12:00.

effect type

power LED

selector

headphone

volume controls

jacks

mic inputs

mic input

trim controls

instrument input

trim controls

R section

headphone jack

instrument jack

remote

connectors

power

phantom

connector

USB

power switch*

connector*

Right Brain:

Protect your ears and your gear: turn all knobs down

on every section of the JamHub before putting on the

headphones. Okay, do this NOW.

Now that everyone's connected a good starting mix is

your control at 2:00 and every one else at 12:00.

Step 2: Connections

1. Plug in the power adapter. The blue LED light tells you when the JamHub

R section

2. Pick a section to call your own.

mic jack

3. Plug in your instrument with a Stereo (TRS) cable using your instrument's or amp's headphone jack for the best

results. Often the headphone jack's output is optimized for headphone listening.

4. Plug in a microphone.

5. Plug in your headphones.

6. Tell your band mates to follow steps 2 through 5.

remote

7. OK, you're almost ready to rock. But first some very important info:

connectors

IMPORTANT! Connect your instruments with a stereo instrument cable or stereo adapter!

Stereo

When connecting your instrument, it's important to use a stereo cable, here's why. Your JamHub is a stereo environment,

just like the real world. Because your instrument's output often includes reverb and other stereo effects, we designed the

JamHub to accept a stereo signal and make the listening experience great. If you connect to the JamHub with a mono

cable, like a standard guitar cable, your sound will be 100% in the left ear, this is because of the way a mono cable works

with a stereo jack.

You can use the included mono 1/4" female to stereo 1/4" male adapter if you need to use a mono cable. But we recom-

mend against using this solution in the long run. Audio coming from this "spit mono" signal is not as good as a stereo

signal. This is because of the way the human hearing system works. In a live jam, each ear hears something slightly

different because of reflections in the room. With "split mono" each ear hears the exact same thing and that reduces our

perception of clarity. Therefore "split mono" is not as optimal as a true stereo signal, so we recommend using a stereo

signal and a stereo cable.

headphone input

instrument input

mic input

is ready.

Mono