JamHub Tracker MT16 Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Rejestrator głosu JamHub Tracker MT16. JamHub Tracker MT16 20 stron. Portable multitrack recorder
Również dla JamHub Tracker MT16: Podręcznik użytkownika (20 strony), Podręcznik (2 strony)
Drukuj stronę
Sample Rate – 44.1kHz, 48kHz, 96kHz
Set your sample rate according to your recording needs, but note that sampling
rates are calculated by the speed of the media storage device connected. If you try
to record at higher frequencies than the device can support, you may lose audio.
Menu Top
Setting → Audio → Sampling Rate
»
Choose 44.1kHz, 48kHz or 96kHz using
»
»
Save by pressing
When recording in 96kHz, it is inadvisable to use an SD card. The files you produce
when recording in this mode are too large for the average SD card, so only channels
1-6 may be activated during 96KHz recording when using an SD card. Recording using
the JamHub mapping will also be disabled in this mode.
To record all 16 channels of audio in 96KHz, make sure that your Tracker MT16
is running software revision #2.0 or higher.
Settings → Status → Firmware Rev
»
Once you have updated your Tracker MT16, reference the latest online manual for
information on hooking up an external drive via USB.
Audio Formats - WAV, or MP3
Your Tracker MT16 supports WAV or MP3 file formats. WAV files are commonly used
for high quality recordings and are large file sizes. MP3 files compress your audio,
allowing you to record more and send files across a network more easily.
Menu Top
»
Setting → Audio → Audio Format
»
Choose WAV or MP3 using
»
Save by pressing
on the desired option, an '
or
buttons
on the desired option, an '
or
buttons
*
' indicates the current setting
*
' indicates the current setting
13