Avanti MO699SST-1 Instrukcja instalacji i montażu
Przeglądaj online lub pobierz pdf Instrukcja instalacji i montażu dla Kuchenka mikrofalowa Avanti MO699SST-1. Avanti MO699SST-1 4 stron. Microwave oven bracket only to be used in models mo699sst-1/mo7080mw/mo7090mb/m07180tw/mo7280tb installation
Drukuj stronę(Only to be used in models MO699SST-1/MO7080MW/MO7090MB/M07180TW/MO7280TB installation)
Parts List &
Before you start this installation make sure you have all the parts listed below.
Hardware
Read entire installation sheet before you start assembly of this item.
Microwave Oven Models
Part Number
A
MOM9704
B
9704-001
C
9704-002
D
9704-003
E
9704-004
Installation Procedures:
1)
Bracket Configuration:
Holes (A), (B) and (C) are the existing holes in the upp er part of the Metal bracket. Holes (D), (E), (F) and (G)
are also existing holes in the lower part of the Metal bracket.
See illustration #1.
2)
Installation of the upper side of the Metal bracket to the Microwave:
Place top of the bracket on the back of the microwave. Insert one of the (3) Phillips Hex Head Self Tapping
screws provided into pilot hole (A) then proceed installing the remainin g (2) two Phillips Hex Head Self
Tapping screws into holes (B) and (C).Secure using a Phillips head screwdriver.
See illustration # 2.
Installation & Assembly
Microwave Oven Bracket Installation Instruction
MO699SST-1/MO7080MW/MO7090MB/M07180TW/MO7280TB
Qty
1
Mounting Bracket
2
3
No. 8 x 5/8" Phillips Hex Head
Self Tapping Screw
4
No. 8 x 1" Phillips Pan Head
Sheet Metal Screw
4
Plastic Anchor (¼" x 1")
A
D
E
Description
Locking Pin
B
F
Illustration # 1
1
C
G