HIKVISION DS-9016HUHI-F8/N Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION DS-9016HUHI-F8/N. HIKVISION DS-9016HUHI-F8/N 17 stron.

Drukuj stronę
1 3
S E T U P R E C O R D I N G ( c o n t i n u e d )

 Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1.
Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
Use Camera pull-down menu to select camera to configure.
2.
Check the Enable Motion Detection checkbox to enable motion detection.
3.
4.
Use the Sensitivity boxes to select how responsive the detection should be (the more green
boxes lit, the greater the sensitivity).
5.
Drag a grid(s) over the area(s) on the image that will be sensitive to motion.
6.
Click the Settings Set button to configure Arming Schedule (when detection is enabled) and
Linkage Actions (what action(s) to take when motion is detected).









 TYPE
Motion or Continuous (default)
 COLOR
Shows Recording Schedule days:
• Blue=Continuous
• Yellow=Event (motion/alarm)
• Grey=None
 TIMES
Customize schedule times (ignore for
"motion only" recording)
 ADD
Press to add time settings to
schedule
 ENABLE SCHEDULE
If not checked, camera will not record
 CAMERA
Select camera
ENABLE MOTION DETECTION
Click to enable/disable
 MOTION GRID
Draw area that will detect motion
SENSITIVITY
Set green squares for sensitivity (in
example, sensitivity is 3)
 SETTINGS/SET
Arming schedule & linkage actions
APPLY