Garden Furniture Centre LDHR018-200EKY-M Instrukcje bezpieczeństwa i instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje bezpieczeństwa i instrukcja obsługi dla Grzejnik tarasowy Garden Furniture Centre LDHR018-200EKY-M. Garden Furniture Centre LDHR018-200EKY-M 4 stron. Infrared patio heater

Drukuj stronę



The distance between the bottom edge of the appliance and the floor must be at least 1.8 M.

See figure 2.



There must be a distance of at least 0.2 M between the appliance and the ceilings, roofs or

other covers. See figure 2.



There must be a distance of at least 0.5 M at each side between the appliance and walls or

the like. See figure 2.



Recommended degree to mounting surface is 45°. See figure 3.



the rotation angle is 60° . See figure 5.



Pay attention that, the installation of the appliance must not add excessive wind load.



Fix the mounting bracket on the wall first. Ensure that the place to be installed is secure and

firm. Or connect the appliance to the stand.



Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw's

connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to

loose.



Plug in the power source and operate the remote control. Then observe, whether during the

first 10‐15 minutes the appliance works trouble‐free.



If you do not use,please remove battery socket



screws' connection. Mechanical bearing pressure and oscillation due to wind or rain could

lead to loose.



Plug in the power source and operate the remote control. Then observe, whether during the

first 10‐15 minutes the appliance works trouble‐free.



If you do not use,please remove battery socket

Figure1: Mounting bracket (wall bracket) and

anchor dowels provided. Connection from the wall

to the infrared heater.

Figure3: Tilt angle.

Figure5: Rotation angle

Figure2: Min. distance to floor, ceiling and wall.

Figure 4: Max.remote distance