Lexmark 21Z0300 - Laser Printer Government Compliant Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Lexmark 21Z0300 - Laser Printer Government Compliant. Lexmark 21Z0300 - Laser Printer Government Compliant 10 stron. Lexmark c935: supplementary guide
Również dla Lexmark 21Z0300 - Laser Printer Government Compliant: Podręcznik drukowania (4 strony)
Drukuj stronę
9
Insert the new waste toner box.
10
Place the new printhead lens cleaner in the notches of Door E.
11
Close Door E6.
12
Close Door E.
13
Remove all paper from the printer paper path.
Visit www.lexmark.com/recycling to learn how to recycle the
waste toner box.
Replacing a photoconductor
Replace the black photoconductor when 84 Replace black
pc unit appears. Replace the cyan, magenta, and yellow
photoconductors when 84 Replace color pc units
appears.
1
Open Door E (front printer door).
Warning—Potential Damage: To avoid overexposing the
photoconductors, do not leave the door open for more than
10 minutes.
7
2
Release the bar by pressing the E5 button located on the
bottom of the E5 latch, lift the E5 latch, and then press the bar
down.
3
Remove the photoconductor(s) specified on the display.
Photoconductor color Opening name
Black
E1
Cyan
E2
Magenta
E3
Yellow
E4