Garden Gear M1E-LD-115 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Garden Gear M1E-LD-115. Garden Gear M1E-LD-115 18 stron. Hedge and edge trimming shears
Drukuj stronę
Fitting (Fig. 7-8
Fit the blade, by aligning the holes in the blade onto the drive pins. (Fig.7).
•
When refitting the SDS blade cover, ensure all 4 legs are inside the
•
housing before sliding the cover into place.
Replace the blade cover, by sliding it back towards the blade (Fig.8).
•
Fig.7
Blades can cause injury. Do not press the safety lock of the shear during
maintenance work.
Note: To ensure long and reliable service, regularly carry out the following
maintenance:
Check for obvious defects such as a damaged/ loose blade, fixings or
•
components.
If the tool should stop working properly, repair should be carried out by
•
your local hardware store.
Fig.8
Maintenance
Maintenance
Maintenance
Maintenance
12