HIKVISION ERT-F2 Series Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION ERT-F2 Series. HIKVISION ERT-F2 Series 14 stron.

HIKVISION ERT-F2 Series Skrócona instrukcja obsługi
9
N E T W O R K S E T T I N G S
Properly configure the network settings before operating the DVR over a network.
• General Network Settings
1. Go to Menu > Configuration > Network > General.
2. Configure the general network parameters.
3. Click Apply to save the settings.
4. Check the Enable DHCP checkbox.
5. Press Refresh to update the IPv4 address, subnet mask, and IPv4 default gateway.
6. Disable DHCP (uncheck the checkbox).
7. Change "Preferred DNS Server" value to 8.8.8.8 (leave Alternate DNS Server blank).
θ
• Set Remote Viewing Ports
After assigning the IP information, click the More Settings tab.
The More Settings tab contains the ports that need to be forwarded for remote access.
ω
ε
ρ
q
τ
ψ
θ GENERAL TAB
ω NIC TYPE (Not changeable)
ε ENABLE DHCP
Check box to have router assign IP
address (optional)
ρ IP V4 ADDRESS
τ PREFERRED DNS SERVER
Default is 8.8.8.8
ψ ALTERNATE DNS SERVER
Leave blank
SERVER PORT is responsible for the
mobile app and client software log-in
responsible
HTTP PORT is
browser log-in
responsible
RTSP PORT is
video/audio streaming
NOTE: The HTTP port, server port,
and RTSP port can be changed
to avoid conflicts with the ISP
or if multiple devices are
installed at a single location.
for Web
for