Lexmark 2491 - Forms Printer B/W Dot-matrix Skrócona instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Lexmark 2491 - Forms Printer B/W Dot-matrix. Lexmark 2491 - Forms Printer B/W Dot-matrix 19 stron. Tech notes
Również dla Lexmark 2491 - Forms Printer B/W Dot-matrix: Uwaga techniczna (3 strony)
Drukuj stronę
Top-Of-Form
Setting Top-Of-Form for continuous form paper
in push mode
Top-Of-Form can range from minus 1 inch to plus 14 inches from the top of
continuous form paper.
Note:
1
Clear the paper path.
If the Paper Out light is Off, tear off excess forms and press Load/Unload.
Press FormFeed to clear a cut sheet.
2
Move the paper select lever to continuous forms
3
Load continuous form paper on the push tractor feed pins (or Tractor 2
feed pins if you are using the optional Tractor 2 Feeder).
4
Remove the ribbon access cover.
5
Press Load/Unload. The Paper Out light goes Off.
Use this method to also set Top-Of-Form for continuous
forms loaded in the optional Tractor 2 Feeder.
15
.