HIKVISION HiLook Series Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla DVR HIKVISION HiLook Series. HIKVISION HiLook Series 20 stron. Smart hybrid light bullet & turret camera
Również dla HIKVISION HiLook Series: Skrócona instrukcja obsługi (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (17 strony)

Figure 2-15 Dissemble the Camera

9. Secure the mounting base to the ceiling with three

PA4 × 25 screws.

Figure 2-16 Attach the Gang Box to the Ceiling

10. Pull out the clip plate and install the camera back to

the mounting base. Push the clip plate back in to

secure the camera.

11. Connect the power cord and video cable.

12. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Tilt Position

[0° to 75°]

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

13. Tighten the screw to finish the installation.

2.2.2 Ceiling Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-17 Install the Camera

Pan Position

[0° to 360°]

Figure 2-18 3-Axis Adjustment

Rotation Position

[0° to 360°]