HIKVISION HiLook Series Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla DVR HIKVISION HiLook Series. HIKVISION HiLook Series 13 stron. Smart hybrid light bullet & turret camera
Również dla HIKVISION HiLook Series: Skrócona instrukcja obsługi (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (20 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (17 strony)

Make sure the wall is strong enough to withstand



three times the weight of the camera and the mount.

If the product does not function properly, contact



your dealer or the nearest service center. Do NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Installation of Type I Camera

2.1.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Align the screw holes in the bracket to the ceiling,

and secure the camera with three PA4 × 25 screws

(supplied).

Figure 2-2 Secure the Camera to the Ceiling

5. Connect the power cord and video cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

Scre w Hole

Figure 2-1 Drill Template

Figure 2-3 3-Axis Adjustment

Scre w Hole

tem pl ate

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B