HIKVISION HWD-7108MH-G2S Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION HWD-7108MH-G2S. HIKVISION HWD-7108MH-G2S 18 stron.

3.5 User Logout, Shutdown and Reboot

Purpose

You can log out of the system, shut down, or reboot the device on your demands.

Step 1 Go to Menu > Shutdown.

Step 2 Click Logout, Shutdown, or Reboot.

After you have logged out of the system, menu

operation on the screen is invalid. It is required to enter

a user name and password to unlock the system.

3.6 Viewing Signal Input Status

Purpose

The analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be recognized and connected

automatically. For some series of DVR, you can configure 5 MP long distance transmission on the Signal Input

Status interface. For other models, there is no Signal Input Status interface.

The following steps are about 5 MP long distance transmission configuration for the supported DVR.

Step 1 Go to Menu > Camera > Signal Input Status.

Step 2 Click

to enter the 5 MP Long Distance

Transmission Settings interface.

Step 3 Check the channel(s) to enable 5 MP long

distance transmission.

Step 4 Click Apply to save the settings and OK to

return to the Signal Input Status interface.

Digital Video Recorder Quick Start Guide

Figure 3-5 Signal Input Status

Figure 3-6 5 MP Long Distance Transmission Settings

Figure 3-4 Logout