GARDEN MASTER GM2315 Instrukcja montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Przechowywanie na zewnątrz GARDEN MASTER GM2315. GARDEN MASTER GM2315 8 stron. Sloping roof shed
Również dla GARDEN MASTER GM2315: Instrukcja montażu (8 strony)
Drukuj stronę
If you choose to vary from these instructions your warranty will be impaired.
If you feel confident that you do not need to read through these instructions, see page 2.... January 2010
Basic overview of what I am trying to achieve...
"For those of us who do not like reading instructions...."
Front Wall (Page 3)
1.
your shed. Cap the sheets with channels (2 sided cutout - Top and 1 sided cutout - bottom). Use Door spac-
ers to make sure door fits gap OK (they sit on top of the jambs). Drill & fix (Rivet or screw) at every 2nd rib.
Attach door spacer at each end thru door jambs and channels. At least 1fixing per sheet underneath into
sheeting pan top and bottom and also through door spacer and jamb. Fit padbolt.
Back (Page 4)
2.
: Join Sheets together. Cap with Channels same as front wall and fix thru every 2nd rib and at
least 1 fixing per sheet thru the back of the channel into the pan of the sheeting. More in high wind areas.
Roof (Page 4):
3.
yet). Attach "L"s to ribs at each end of sheeting at corners and 600mm apart in between.
End walls (Page 5)
4.
and fix at corners and every 2nd rib in between. 2 -3 fixings up underneath into pan of sheeting, top and Bot-
tom.
Panel Assembly (Page 6)
5.
on! Make sure you have at least 6 fixings down each corner when you join the walls. Fix one side of the roof
on thru the "L" into the top channel on one end wall approx 500mm apart. Check overhang and fix to the
other end wall at the same measurement. You now need to fix down thru every 2nd pan in the roof into the
top channels on the front and back walls. More in high wind areas. Please make sure that you have removed all
swarf filings as the rust spots that they produce may hinder any warranty claims.
Generally most fixings are spaced at 300mm apart
•
Keep fixings in the pans as close to the ribs as possible for added strength.
•
Ribs will always protrude to the outside of the shed.
•
Extra internal fixings is strongly recommended in high wind areas.
•
If you feel a little anxious about putting your shed together, feel free to ph 0800 ENZEMBLE for a quote to install
"Just join the sheets together and fit
the channels to the top and bottom of
the sheets as a framing to make 4
walls and the roof."
Follow these basic steps:....
: Layout sheets and door assembly in the configuration you requested when ordering
Join Sheets together. Cap with Channels (no cutouts). Fix @ every 2nd rib. (Not corners
: Join the end wall sheets together that slope the same way. Cap with end wall channels
: You have now made up your panels. It's just, Join the corners and put the roof
Rib
Pan
Pg 2