Avantree HT5009 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Słuchawki bezprzewodowe Avantree HT5009. Avantree HT5009 9 stron. Wireless headphones and transmitter set
Drukuj stronę
- 1. Table of Contents
- 2. What's in the Box
- 3. Products Overview
- 4. LED Indication & Voice Prompts
- 5. Turn on HT5009
- 6. Use HT5009 with Your
- 6. Check Your Tvs Output Options before the Set
- 6. Tvs with OPTICAL Audio out
- 6. Tvs with Aux/3.5Mm Audio out
- 6. Tvs with RCA Audio out (Red/White Ports Labeled "AUDIO OUT")
- 7. Use HT5009 with Your AV Receiver with 6.35Mm PHONE Jack
- 8. Use the Headphones Independently with Cellphone
- 8. Add a 2 Nd Pair of Bluetooth Headphones
- 9. Charging Headphones
- 10. Clear Pairing History
- 11. Troubleshooting
Clear pairing history
Clear paired history of the transmitter:
Press and hold the
and
Right after that,
Green
and White LED will flash rapidly together, indicating Oasis Plus entering pairing mode
again. TX history is cleared.
Clear paired history of the headphones:
After turning on, press and hold both "+"and"-" for 10 seconds until the LED turns
of the headphone has been cleared, it will enter pairing mode automatically with the LED flashing alternately
RED
and BLUE.
Troubleshooting
https://support.avantree.com/hc/en-us/sections/360003036792
buttons together for 7 sec until you hear voice prompt "Pairing history cleared",
TX
AUX
RX
OPT
VOICE
AUX
OPT
Hold for 10s
SBC
A
APTX
B
LL
HD
Hold for 7s
PINK
- now the pairing history
8