Avantree BTTC-418-P Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Nadajnik Avantree BTTC-418-P. Avantree BTTC-418-P 8 stron. Bluetooth transmitter

After connecting your audio cable as above, once the VALID audio signal is detected, the "AUX" indica-

tor on the Audikast Plus will light up SOLID WHITE, and you should be able to hear your TV/audio

source through your headphones.

If not:

1)Ensure your TV speaker setting is set to "Headset."

2) Plug a pair of wired headphones into the headphones jack you're using with the Audikast Plus on

TV. See if you can hear anything.

3) Turn up the volume and see if it helps.

4) Ensure the audio cable is good and fully plugged.

TVs with RCA audio out(Red/White ports labeled "AUDIO OUT")

After connecting your audio cable as above, once the VALID audio signal is detected, the "AUX" indica-

tor on the Audikast Plus will light up SOLID WHITE, and you should be able to hear your TV/audio

source through your headphones;

If not:

1)Ensure that you're using the TV Red/White ports labeled

Red/White ports will NOT work.

2) Ensure that your TV Speaker setting is set to "External Speaker."

3) Plug a pair of wired headphones into the RCA jack you're using with the

Audikast Plus on TV. See if you can hear anything.

4) Turn up the volume and see if it helps.

Speakers

Internal speakers

External speakers

Headset

"AUDIO

OUT" other