Janam CK-XP-4 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria Janam CK-XP-4. Janam CK-XP-4 8 stron. Four-slot cradle kit
Również dla Janam CK-XP-4: Skrócona instrukcja obsługi (9 strony)
Drukuj stronęA. SET UP
We recommend you turn your computer off before connecting the cradle. After following the steps below, turn
the computer back on.
1. Connect the power supply and line cord.
2. Plug the power supply into the power supply receptacle on the cradle.
3. Connect the USB cable to the cradle.
4. Plug the USB cable into one of your computer's USB ports.
5. Plug the cradle's power supply into a power outlet.
B. INSERTING A DEVICE INTO THE FOUR-SLOT CRADLE
Important: Proper insertion is required to ensure connection. Be sure to insert the device as follows:
1. Place a mobile device in a cradle well (seating the device without trying to join connectors).
2. Tilt-rotate the device forward (bringing top end of unit forward) as you apply downward pressure to fully
insert in cradle well, joining connectors.
C. SYNCHING (XP SERIES ONLY)
Using the synch button, you can successively hotsynch up to four XP Series devices with Palm Desktop software. With
custom software, you can also synchronize your mobile computers with enterprise data through applications designed
by third party vendors.
To automatically synch up to four XP Series mobile computers using the synch button, simply press the synch
button on the cradle after inserting the device(s). Sequentially, each mobile computer will power-up and
conduct the synch process. Each device will remain powered-up for approximately two minutes after synching,
then automatically power-down.
Janam Technologies
Getting Started
4