Avantree Sunday Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon Avantree Sunday. Avantree Sunday 4 stron. Multi-point solar charging bluetooth speakerphone
Drukuj stronęcontinuously without any additional charge required by the car charger.
3) Under strong sunshine, the unit could be under slow charging without obvious LED indicator
because the solar charging power is relatively low and the LED cover housing is dark.
4. Pairing / Connect (Tutorial online)
1) It is important to pair the Speakerphone with your Bluetooth device for the first time use.
2) Pairing procedure:
A. Ensure the speakerphone is off.
B. Turn on the speakerphone, if not detect any connection, it will automatically go to pairing
mode and you can also go into pairing mode by pressing and holding the MFB button until LED
blinks blue and red alternatively.
C. Activate Bluetooth on your phone, and search for Bluetooth devices.
D. Select "Avantree Sunday" from the list of found devices.
E. Enter the Bluetooth passkey" 0000" to pair and connect the speakerphone to your phone.
F. Speakerphone is ready for use now.
3) Once paired and connected, the speakerphone will be automatically connected to the device
whenever you turn the speakerphone on again, provided the device is in the
We find most problems are caused by improper pairing between the speakerphone and the
Bluetooth device. Please follow the online instruction step-by-step.
5. Basic Operations
5.1 Turn on / off
A. Turn on the speakphone – Press and hold the MFB for 4 seconds until you hear a short beep,
the blue LED flashes 5 times.
B. Turn off the speakerphone – Press and hold the MFB for 4 seconds until you hear a beep, the
red LED flashes 5 times before power off.
Please note: To save power, the speakerphone will automatically turn off if it is not connected to any
device for more than 30 minutes.
5.2 Answer a call – press the MFB briefly to pick up the call.
5.3 Reject a call – press and hold the MFB for 2 seconds.
5.4 Re-dialing – Press the MFB button twice for last number redialing.
5.5 Ending a call – Press the MFB briefly once.
5.6 Transfer a call –
A. Speakerphone to mobile phone: During a call, press both "V+" and "V-" buttons, the call will
be routed to your mobile phone.
B. Mobile phone to speakerphone: Press both "V+" and "V-" buttons to route the call.
5.7 Speaker Mute & Un-mute
A. Mute: press "MUTE" button, the speaker volume will be decreased to minimal level, the LED
indicates Red during mute mode.
B. Un-Mute: press "MUTE" button during the "Mute" mode, the speaker volume will bake to be
normal level, the red LED goes off.
5.8 Voice Dialing
range.